diff --git a/lightfx/processing.js b/lightfx/processing.js
index bd90101..d984142 100644
--- a/lightfx/processing.js
+++ b/lightfx/processing.js
@@ -1,3 +1,4 @@
+// Set constants
 const states = global.get('homeassistant.homeAssistant.states')
 const occupied = states["binary_sensor.basement_occupied"].state
 const quiet = states["input_boolean.studio_quiet"].state
@@ -21,8 +22,7 @@ const delay = duration * 1000
 const adaptiveSwitchFirstFloor = flow.get("adaptiveFirstFloor", "diskCon")
 const adaptiveSwitchBasement = flow.get("adaptiveBasement", "diskCon")
 
-//! Use delay in service calls, not duration
-
+// Set flow contexts to be used later in the reset node
 flow.set("currentSceneBasement", currentSceneBasement)
 flow.set("currentSceneLivingRoom", currentSceneLivingRoom)
 flow.set("currentSceneTinaDesk", currentSceneTinaDesk)
@@ -35,17 +35,22 @@ flow.set("stateLivingRoom", stateLivingRoom)
 flow.set("stateDiningRoom", stateDiningRoom)
 flow.set("stateBasement", stateBasement)
 
+// Define empty arrays for backup scenes
 let firstFloorLights = []
 let basementLights = []
+// Define empty arrays for basement LED strip zones
 let basement1 = []
 let basement2 = []
 let basementFull = []
+// Define empty arrays for living room LED strip zones
 let livingRoom1 = []
 let livingRoom2 = []
 let livingRoomFull = []
+// Color names are set by default, however certain effects can override them below
 let colorName1 = effectType
 let colorName2 = "white"
 
+// Get lights to add to the backup scenes
 if (stateTinaDesk === 'on') {
     firstFloorLights.push('light.tina_desk_strip','light.tina_lamp_top','light.tina_lamp_side')
 }
@@ -62,6 +67,7 @@ if (stateBasement === 'on') {
     basementLights.push('light.basement_tall_lamp','light.basement_short_lamp','light.basement_stairwell','light.basement_led_strip_1')
 }
 
+// Setup the proper zones to use for the effect
 if (effectDivide === 'half') {
     basement1 = flow.get("halfBasement1", "diskCon")
     basement2 = flow.get("halfBasement2", "diskCon")
@@ -77,7 +83,11 @@ if (effectDivide === 'half') {
     livingRoomFull = flow.get("livingRoomFull", "diskCon")
 }
 
-//! Implement setting of colors here
+// Set/change colors if necessary
+if (effectType === 'police') {
+    colorName1 = 'red'
+    colorName2 = 'blue'
+}
 
 // Set message payloads
 let sendBasementStripFX = {
@@ -232,6 +242,18 @@ let sendDiningRoomLamp = {
     }
 }
 
+let sendReset = {
+    "delay": delay
+}
+
+// Send effect messages
 if (effectBasement === true) {
     node.send([null,null,null,null,[sendBasementStripFX,sendBasementLights,sendBasementStrip1,sendBasementStrip2],null])
-}
\ No newline at end of file
+}
+
+if (effectFirstFloor === true) {
+    node.send([null,[sendLivingRoomStripFX,sendLivingRoomLights,sendLivingRoomStrip1,sendLivingRoomStrip2],sendTinaDeskLights,sendDiningRoomLamp,null,null])
+}
+
+// Send the reset message to start the timer
+node.send([null,null,null,null,null,sendReset])
\ No newline at end of file
diff --git a/lightfx/reset.js b/lightfx/reset.js
new file mode 100644
index 0000000..1876243
--- /dev/null
+++ b/lightfx/reset.js
@@ -0,0 +1,20 @@
+// Set constants
+const states = global.get('homeassistant.homeAssistant.states')
+const currentSceneBasement = flow.get('currentSceneBasement')
+const currentSceneLivingRoom = flow.get('currentSceneLivingRoom')
+const currentSceneTinaDesk = flow.get('currentSceneTinaDesk')
+const adaptLivingRoom = flow.get('adaptLivingRoom')
+const adaptBasement = flow.get('adaptBasement')
+const nightLivingRoom = flow.get('nightLivingRoom')
+const nightBasement = flow.get('nightBasement')
+const stateTinaDesk = flow.get('stateTinaDesk')
+const stateLivingRoom = flow.get('stateLivingRoom')
+const stateDiningRoom = flow.get('stateDiningRoom')
+const stateBasement = flow.get('stateBasement')
+const scenesLivingRoom = flow.get('scenesLivingRoom', 'diskCon')
+const scenesBasement = flow.get('scenesBasement', 'diskCon')
+const scenesTinaDesk = flow.get('scenesTinaDesk', 'diskCon')
+
+// Reset code goes here
+
+node.status({fill:"green",shape:"dot",text:"Success"})
\ No newline at end of file